Madrid Engineering Group takes great pride in providing our clients with the best of quality drilling services in our industry. In the past 20 years of servicing our clients, MEG has been tested by their clients to some of the most challenging drilling projects in the state of Florida. With these challenges we had to invest in proper equipment and well trained “experienced drillers” to complete these projects. With over seven thousand successful projects completed this has allowed MEG to gain the experience and respect adding our name as one of the elite Geotechnical Engineering firms in the state of Florida. With our drillers having 105 years of drilling experience combined has allowed MEG to continue to grow and expand its services throughout the state of Florida taking on larger and more difficult drilling projects, specializing in Rock Coring and drilling deep borings. Working with the FDOT and other government agencies has given our clients that MEG is up to any drilling project. Our fleet of drilling equipment are well maintained which allows for no oil leaks and oil/grease build up. We at Madrid Engineering take great pride in how we represent our clients. Our commitment to our clients is to provide the best quality of drilling services with not only the most qualified driller for the task given, but to have that task performed of the highest quality with integrity and professionalism our clients demand.

MEG’s drilling, field and lab personnel are MSHA-trained. MEG is also very proud of our Safety Record. Thanks to our in house safety officer and ongoing safety training done not only in the office but in the field as well. At MEG safety is truly our number one priority and because of this our OSHA scores are second to no one.

We are able to access boring locations in areas around buildings and or structures to drill test borings and obtain samples and information needed for our team of engineers to make recommendations for the stabilization of structures and there foundation. The track mounted rigs we use are rubber track and have very low ground pressure, minimizing damage if any at all to vegetation, asphalt, concrete and shallow underground utilities. We also leave the project area looking undisturbed (as if we were never there), leaving our customers “clients” very pleased with the end result.

In the picture below illustrates the importance of collecting clean samples and clear documentation as to where the sample was taken. This is a standard sampling and documenting procedure for all of MEG’s “Sinkhole Investigations”.

Using mini rigs in highly populated areas minimizes the impact of the surrounding businesses and also allows patrons to go about their daily activities. As you can see in the photo to the left you can set up and drill at boring locations that are not accessible with your typical geotechnical drilling rig. Also note that because of the rig is much smaller than your typical drilling equipment this also allows for minimal cleanup do to we use smaller mud tubs that do not require as much drilling slurry. These rigs can drill as deep as 200’ pending on subsurface conditions.

Taking Quality Control as a serious protocol here at Madrid Engineering, re assures our Project Managers and clients that they are receiving accurate data while performing test borings per ASTM standards. MEG’s Quality Control standards are second to none as the QC protocol is implicated at every level with in our firm.

• Each of our drill crew are assigned to a specific drill rig so when any calibration is performed it is done with the crew that it has been assigned to, to reassure data being collect in the field is consistant.

• MEG has seven drill rigs ready to take on any task that you may need. We also have an in- house geotechnical laboratory for testing the soil samples we obtain by drilling.

• We also are able to access inside of buildings that have cracks or failure issues to find the problem. Based on the findings, the problem(s) can be diagnosed and a remediation plan drawn up by our engineers.

• Checking out remote areas before you build makes good sense. We are the ones to call to get the job done. Even areas with no water source can be accessed by our rigs and water trucks.